|
The C20 Packages are
prestaged configurations for specific processors and connections.
Click on the connection that matches your configuration to download
the package.
|
Protocol |
Security |
Network |
ATM |
Connections |
TCP Host/Processor |
| Async |
SSL |
Broadband |
CSP200 |
Unidirectional |
|
|
|
|
| Async |
SSL |
Broadband |
IS3400 |
Unidirectional |
|
|
|
|
| Async |
SSL |
Broadband |
C4000 |
Unidirectional |
DNS |
CDS |
Lynk |
Metavante |
| Async |
SSL |
Broadband |
Triton
9100/9700 |
Uni/Bidirectional |
|
|
|
|
| Async |
SSL |
Broadband |
Dial Generic
* |
Unidirectional |
|
|
|
|
| Async |
SSL |
Broadband |
Dial Generic
* |
Unidirectional |
|
| Async |
None |
Broadband |
Dial Generic
* |
Unidirectional |
|
Please
Click on the link under the Processor for the specific Installation
Package. All packages need latest Firmware.
* Dial Generic = Baud Rate - 2400, Data Bits - 7, Stop Bits - 1, Parity - Even
* Unidirectional = Modem makes connection to C20 in Dial Generic Mode *.
* Bidirectional = TCP connects to C20 on TCP Port 1000 to Ring modem at Baud Rate - 2400 (57600 for DNS), Data Bits - 8, Stop Bit -1, Parity - None
* Not Specified = TCP needs to be set up manually.
Note: All Packages on this page sets Ethernet on JBM device to DHCP Enabled.
Instructions for loading a Package or Firmware on a C20 can be found at: http://jbmelectronics.com/tech/c2x_frm_pkg_net.htm
For Latest Firmware: C20 Firmware
| 
