Gateway C111, C201 and C251 Packages
The C111, C201 and C251 Packages are pre-staged configurations for specific processors
and connections. Click on the connection that matches your configuration
to download the package.
C111
Protocol |
Security |
Network |
ATM |
Connetions |
TCP Host/Processor |
| Async-Dial |
SSL |
Broadband |
Dial Generic * |
Uni/Bidirectional* |
DNS |
|
Lynk |
Metavante |
| Async-Dial |
SSL |
Broadband |
Dial Generic * |
Unidirectional * |
Not Specified |
| Async-Dial |
None |
Broadband |
Dial Generic * |
Unidirectional * |
Not Specified |
Click link under Processor for specific Package.
* Broadband = TCP traffic will be sent trhough Eth 0 on JBM C111.
* Dial Generic = Baud Rate - 2400 (1200 for DNS), Data Bits - 7, Stop Bits - 1, Parity - Even
* Unidirectional = Modem makes connection to C111 in Dial Generic mode *.
* Bidirectional = TCP connects to C111 on TCP Port 1000 to Ring modem at Baud Rate - 2400 (57600 for DNS), Data Bits - 8, Stop Bit -1, Parity - None
Instructions for loading a Package or Firmware on a C111/C201/C251 can be found at: www.jbmelectronics.com/tech/gau_faq.htm
For Latest Firmare: C111/C201/C251 Firmware
C201
Protocol |
Security |
Network |
ATM |
Connetions |
TCP Host/Processor |
| Async-Dial |
SSL |
Activate Cell * |
Dial Generic * |
Uni/Bidirectional* |
DNS |
|
|
|
| Async-Dial |
SSL |
Cell Active * |
Dial Generic * |
Uni/Bidirectional* |
DNS |
|
|
|
| Async-Dial |
SSL |
Activate Cell * |
Dial Generic * |
Unidirectional * |
Not
Specified |
| Async-Dial |
SSL |
Cell Active * |
Dial Generic * |
Unidirectional * |
Not
Specified |
| Async-Dial |
None |
Activate Cell * |
Dial Generic * |
Unidirectional * |
Not
Specified |
| Async-Dial |
None |
Cell Active * |
Dial Generic * |
Unidirectional * |
Not
Specified |
Click
link under Processor for specific Package.
* Cell Active = If your JBM device already is activated and working on the Cell Network use a Cell Active package.
* Activate Cell = If you just registered your ESN with the Cell provider use an Activate Cell package.
* Dial
Generic = Baud Rate - 2400 (1200 for DNS), Data Bits - 7, Stop Bits
- 1, Parity - Even
* Unidirectional = Modem makes connection to C201 in Dial Generic Mode *.
* Bidirectional = TCP connects to C201 on TCP Port 1000 to Ring modem at Baud Rate - 2400 (57600 for DNS), Data Bits - 8, Stop Bit -1, Parity - None
Instructions
for loading a Package or Firmware on a C111/C201/C251 can be found at: www.jbmelectronics.com/tech/gau_faq.htm
For
Latest Firmare: C111/C201/C251
Firmware
C251
Protocol |
Security |
Network |
ATM |
Connetions |
TCP Host/Processor |
| Async-Dial |
SSL |
Activate Cell * |
Dial Generic * |
Uni/Bidirectional* |
DNS |
CDS |
Lynk |
Metavante |
| Async-Dial |
SSL |
Cell Active * |
Dial Generic * |
Uni/Bidirectional* |
DNS |
CDS |
Lynk |
Metavante |
| Async-Dial |
SSL |
Activate Cell * |
Dial Generic * |
Unidirectional * |
Not Specified |
| Async-Dial |
SSL |
Cell Active * |
Dial Generic * |
Unidirectional * |
Not Specified |
| Async-Dial |
None |
Activate Cell * |
Dial Generic * |
Unidirectional * |
Not Specified |
| Async-Dial |
None |
Cell Active * |
Dial Generic * |
Unidirectional * |
Not Specified |
Click link under Processor for specific Package.
* Cell Active = If your JBM device already is activated and working on the Cell Network use a Cell Active package.
* Activate Cell = If you just registered your ESN with the Cell provider use an Activate Cell package.
* Dial Generic = Baud Rate - 2400 (1200 for DNS), Data Bits - 7, Stop Bits - 1, Parity - Even
* Unidirectional = Modem makes connection to C251 in Dial Generic Mode *.
* Bidirectional = TCP connects to C251 on TCP Port 1000 to Ring modem at Baud Rate - 2400 (57600 for DNS), Data Bits - 8, Stop Bit -1, Parity - None
Instructions for loading a Package or Firmware on a C111/C201/C251 can be found at: www.jbmelectronics.com/tech/gau_faq.htm
For Latest Firmare: C111/C201/C251 Firmware
| 
