Wireless Series Routers

JBM Electronics is now bridging the gap between traditional wire line devices and CDMA or GSM wireless services. The Wireless Gateways from JBM Electronics offer tremendous cost savings and increased flexibility for companies’ networks and remote devices. The Gateways provide a simple backup option for office LANs, superior connections for older equipment and a quick install almost anywhere in the country.

Models

C120 and C130 Series

The C120 and C130 Series Gateways support carrier-supplied PC Cards that support high-speed connections on GSM Edge and CDMA EV-DO networks. Theses units provide a CardBus Slot for the PC Card.

C200 and C250 Series

The Connector Series are small footprint units designed to connect several devices to a Wireless Network.

The C200 Series Gateways support CDMA connections from Sprint and Verizon using an embedded cell modem.

The C250 Series Gateways support GSM connections from Cingular and other GSM carriers using an embedded cell modem.

Edge and EV-DO Gateways - The C130 Series Gateways support carrier-supplied PC Cards that support high-speed connections on GSM Edge and CDMA EV-DO networks. The C130 Series provide a CardBus Slot for the PC Card.

C200 and C250 Series	C120

For illustrations on how the Gateways can support multiple devices, click here. For correct Wireless Series ordering instructions, click here.

	Immediate deployment
	Support all cell plans from high-speed to Telemetry
	No circuit installation charges
	Increased mobility
	Tremendous improvements in transaction speeds
	Eliminates dedicated dial or leased lines for remote devices
	Lower transaction fees for IP connectivity versus dial or Leased Line
	Reduction in recurring phone line costs
	Lower capital expense by maintaining to use existing equipment
	No need to retrain employees on new equipment
	Quick and easy to install
	Seamless installation to existing systems and equipment
	Supports different processors through application-specific headers
	Selects TCP session and header format via dial string or data
	Facilitate remote management via IP connectivity using Telnet or SNMP
	Improve overall manageability of remote devices and reduce truck rolls

Financial (Transaction Data)	Transportation (Monitoring & Control)
- Point of Sale (POS) Terminals	- Railroads
- ATMs	- Airline
- Retail	- Reservations
- C Stores	- Traffic Management
- Gas Stations	Security (Monitoring & Control)
Utilities (Monitoring & Control)	- Surveillance
- Electric Power Generation & Distribution	- Alarms
- Natural Gas	- Access Entry
- Water	Telecommunications (Monitor & Control)
- Pipeline	- Out of Band Management
Government (Monitoring & Control)	- Terminal Server
- Local	- Environmental Monitoring & Control
- State
- Federal

Wireless Interface
The C200 and C250 use an industry standard Wavecom module for compatibility with all CDMA and GSM wireless carriers. The wireless interface is designed with an external antenna for mounting outside equipment cabinets for better reception.

The C120 and C130 use a carrier-supplied EV-DO or Edge/HSDPA card to provide compatibility with all CDMA and GSM wireless carriers. The wireless interface uses the Air Card's antenna. Many Air Cards also support external antennas for mounting outside equipment cabinets or ATMs for better reception.

Security
All of the JBM Gateways have a full range of Linux security features including SSL client/server, IPSEC VPN client/server, Manual or Dynamic Keys, 3DES or AES encryption, Network Address Translation (NAT), transparent bridging mode, IP and Port filtering, and intrusion protection with an integrated Stateful Inspection Firewall.

Router Functionality
The Gateways offer full IP routing functionality supporting Static, RIP, OSPF, and BGP routing. The Gateways support DHCP, DHCP client, GRE, PPP, and PPPoE for broadband users. Some C120 models support VRRP.

Compatibility
Compatibility is never an issue with the Gateways since JBM uses all standards-based protocols. Interoperability between JBM and other vendor’s router or VPN concentrators is fully supported.

Fallback Routing
One of the Gateway's key features is the ability to perform fallback routing. Fallback routing enables a user to configure alternate paths to the host or to several hosts for disaster recovery. The fallback path can be to a different IP server or with a properly equipped Gateway, through a different connection such as a cell or dial modem.

Management
The JBM Gateways can be configured through a GUI from a web browser or a CLI Command entered via console port or Telnet or SSH. Both connections provide command, control, and monitoring of the Gateways. SNMP is supported with SNMP Traps providing notification of major events in the Gateways. SSH is also supported for security of the management connection. Extensions to the Telnet or SNMP commands are available as a special order.

Dial-Tone Support
The Dial-Tone circuitry provides a dial tone for dial-only async devices. This dial tone simulator and associated modem allows for a simple, non-disruptive connection to a dial only device. The Gateway can route the data based upon the data or phone number dialed (DTMF recognition). This connection supports both legacy async protocols and async PPP. The modem component can also be used as a normal async modem.

IP Header Manipulation
The Gateways support Data and Header manipulation, allowing seamless access into many host systems. This important, customizable feature allows the customer to change the content or format of the IP headers. This capability gives the customer the flexibility to connect to any transaction processor or host system.

Data and Phone Number Routing
In addition to the header manipulation, the Gateways can perform routing based upon the dial phone number or specific data fields. The routed message, built with the processor-specific header, can be sent to the remote destination. This capability allows the Gateway to support many unique processors with all of the conversion occurring at the network's edge.

Protocol Conversion
All of the JBM Gateway products support protocol conversion, and when it comes to protocol conversion, JBM is the industry leader with over 50 different protocols in our software library. Protocol conversion is necessary when converting a host to IP or introducing a new Transaction Switching System. Our Gateway products provide our customers with a seamless and non-intrusive migration to IP. The Gateways support conversion of most financial async protocols.

Product Specifications