 |
The G1000-SPC Card supports
many Legacy protocols, including async,
bisync, Poll/Select, SDLC,
Uniscope protocols. This card can be installed in any G1000.
The G1000-SPC provides full on-board processing intelligence to support the connection to the
Legacy network or device.
Features
| Serial Interface: |
Baud Rate: |
1,200-56,000 bps |
| |
Interface: |
One Female DB-25, RS-232C or
V.35 DTE or DCE mode. |
| PC BUS Type: |
ISA Bus Compatible |
| PC Interface: |
Memory Mapped I/O, Switch Selectable 4K page |
| Microprocessor: |
Motorola 63C09 (3 MHz) |
| Memory: |
128K RAM |
| Warranty: |
1 Year Parts and Labor |
Jumper Settings:
The SPC Card has two blue switch
banks, one with 5 switches and the other with 7 switches. Switches flipped down
(towards the motherboard) are "OFF" or "0". The twelve SPC switches are:
The switches define a hexadecimal setting
by grouping together fours pins. The following chart illustrates how to set a value on a group
of four pins, (for example: A23 - A20) to define the possible range of hex settings.
| Memory
Address |
A23/A19/A15 |
A22/A18/A14 |
A21/A17/A13 |
A20/A16/A12 |
| 0 |
OFF |
OFF |
OFF |
OFF |
| 1 |
OFF |
OFF |
OFF |
ON |
| 2 |
OFF |
OFF |
ON |
OFF |
| 3 |
OFF |
OFF |
ON |
ON |
| 4 |
OFF |
ON |
OFF |
OFF |
| 5 |
OFF |
ON |
OFF |
ON |
| 6 |
OFF |
ON |
ON |
OFF |
| 7 |
OFF |
ON |
ON |
ON |
| 8 |
ON |
OFF |
OFF |
OFF |
| 9 |
ON |
OFF |
OFF |
ON |
| A |
ON |
OFF |
ON |
OFF |
| B |
ON |
OFF |
ON |
ON |
| C |
ON |
ON |
OFF |
OFF |
| D |
ON |
ON |
OFF |
ON |
| E |
ON |
ON |
ON |
OFF |
| F |
ON |
ON |
ON |
ON |
Where: 0DC=[0000][1101][1100],
where:[A23-A20][A19-A16][A15-A12]
The SPC Card is listed by a NRTL to UL
1950 standards and meets FCC Class B regulations.
Prices and specifications are subject
to change without notice.
|
|
|
 |
|
