 |
G1000 QUAD Legacy Interface Card
The G1000 Quad Card provides four-port
serial port for additional port density for the Gateway 1000 systems at a cost-effective price.
Each port's dedicated microprocessor allows any mix of supported protocols to be configured.
The supported Legacy protocols include: async,
bisync, Poll/Select, SNA/SDLC, Uniscope protocols. This card can be installed in any G1000.
The QUAD Card provides full on-board processing intelligence to support the connection to the
Legacy network or device.
Features
| Serial Interface: |
Baud Rate: |
1,200-56,000 bps |
| |
Interface: |
Four Female DB-25, RS-232C, DTE mode or DCE mode
selected with supplied cables |
| PC BUS Type: |
ISA Bus Compatible |
| PC Interface: |
Memory Mapped I/O, Switch Selectable 16K page |
| Microprocessor: |
Four Motorola 63C09 (3 MHz) |
| Memory: |
128K RAM |
| Warranty: |
1 Year Parts and Labor |
Jumper Settings:
The Quad Card has one blue switch bank with
5 pins. Pins flipped down (towards the motherboard) are "OFF" or "0". The five Quad Card pins are:
Quad Cards pre-installed in the G1000 unit will be
shipped with the following switch settings:
- First Quad Card: 0d8,0d9,0da,0db
- Second Quad Card: 0dc, 0dd, 0de, and 0df
- Third Quad Card: 0e0, 0e1, 0e2, and 0e3
- Additional Cards: Look for setting on card or
call JBM Customer Support
Verify that the switches are set as follows:
| Memory Address |
Pin 1 |
Pin 2 |
Pin
3 |
Pin
4 |
Pin
5 |
| 0a0 |
OFF |
ON |
OFF |
OFF |
OFF |
| 0a4 |
OFF |
ON |
OFF |
OFF |
ON |
| 0a8 |
OFF |
ON |
OFF |
ON |
OFF |
| 0ac |
OFF |
ON |
OFF |
ON |
ON |
| 0b0 |
OFF |
ON |
ON |
OFF |
OFF |
| 0b4 |
OFF |
ON |
ON |
OFF |
ON |
| 0b8 |
OFF |
ON |
ON |
ON |
OFF |
| 0bc |
OFF |
ON |
ON |
ON |
ON |
| 0c0 |
ON |
OFF |
OFF |
OFF |
OFF |
| 0c4 |
ON |
OFF |
OFF |
OFF |
ON |
| 0c8 |
ON |
OFF |
OFF |
ON |
OFF |
| 0cC |
ON |
OFF |
OFF |
ON |
ON |
| 0d0 |
ON |
OFF |
ON |
OFF |
OFF |
| 0d4 |
ON |
OFF |
ON |
OFF |
ON |
| 0d8 |
ON |
OFF |
ON |
ON |
OFF |
| 0DC |
ON |
OFF |
ON |
ON |
ON |
| 0E0 |
ON |
ON |
OFF |
OFF |
OFF |
| 0E4 |
ON |
ON |
OFF |
OFF |
ON |
| 0E8 |
ON |
ON |
OFF |
ON |
OFF |
| 0EC |
ON |
ON |
OFF |
ON |
ON |
Note: Addresses 0d0 through 0EC MUST be
used if a video adapter is installed in the Gateway 1000.
The Quad Card is listed by a NRTL to UL
1950 standards and meets FCC Class B regulations.
Prices and specifications are subject to
change without notice.
Click here for
the Quad Card cable information. For pricing, please call
or e-mail us and we will be happy to assist you.
|
|
|
 |
|
