G1000 MPC and MOD Specifications
The G1000 MPC system supports several
different async protocols. This card can be installed in any G1000.
The G1000 MPC consists of a plug-in card and an external module. The card provides an interface to the Gateway
1000 and the module provides the cable connections.
The external module provides 16 DB-25 connectors
with each connector supporting speeds up to 115 kbps. Up to three additional modules (G1000-MOD) can
be cascaded off the first module, supporting up to 64 connections per G1000 MPC card.
Like the other Async expansion cards available
from JBM, the async protocols supported by the G1000 MPC are processed by the G1000's main processor.
If several G1000 MODs are cascaded from the original system, we recommend that a pentium-based
system (G1000-D, E or F) be used. This will provide sufficient processor capability to support
the normal G1000 functions and differrent async protocols. If you are have any questions about
system sizing, please contact us.
G1000 MPC Card
G1000 MOD Front View
G1000 MOD Side View
Features
| Serial Interface: |
Baud Rate: |
1,200-115,000 bps |
| |
Interface: |
16 Male DB-25, RS-232C DTE mode
DCE mode with
adapter cable |
| PC BUS Type: |
ISA Bus Compatible
(G1000-MPC) or PCI BUS Compatible (G1000-MPC/P) |
| PC Interface: |
Choice of seven I/O addresses |
| Microprocessor: |
IDT 3501 (20 MHz) |
| Memory: |
Up to 1 MB RAM |
| Warranty: |
1 Year Parts and Labor |
G1000-MPC Jumper settings:
The G1000-MPC is an ISA based card that requires
jumper settings to select the appropriate interrupt. The G1000-MPC/P is PCI based and does not
require jumper settings.
| I/O Address |
Pin 1 |
Pin 2 |
Pin 3 |
Pin 4 |
| Reserved |
OFF |
OFF |
OFF |
Not Used |
| 104 (Hex) |
OFF |
OFF |
ON |
Not Used |
| 114 (Hex) |
OFF |
ON |
OFF |
Not Used |
| 124 (Hex) |
OFF |
ON |
ON |
Not Used |
| 204 (Hex) |
ON |
OFF |
OFF |
Not Used |
| 224 (Hex) |
ON |
OFF |
ON |
Not Used |
| 304 (Hex) |
ON |
ON |
OFF |
Not Used |
| 324 (Hex) |
ON |
ON |
ON |
Not Used |
OFF - Pin away from board
ON - Pin towards the board
Do not change other jumper
settings without consulting JBM customer support. You can call or
e-mail us for assistance.
The G1000-MPC, G1000-MPC/P Cards and the
G1000-MOD are listed by a NRTL to UL 1950 standards and meets FCC Class B regulations.
Prices and specifications are subject to
change without notice.
Click here for the MPC cable information.
For pricing, please call
or e-mail us and we will be happy to assist you.
| 
