SEARCH 

Gateway 530 Network Diagram

Gateway 530 Network Diagram (13.9 KB)

The G530 is designed for Legacy Protocol applications at remote sites, where multiple applications need connectivity to an IP based WAN. Up to three separate serial data streams are converted to TCP/IP and transmitted through a 10/100BaseT link. Each port on the G530 is independent and can support a unique protocol or baud rate. The G530 converts the data from serial devices using RS-232C or V.35 at speeds up to 56 KB. The Legacy equipment can be directly attached or modem connected.

Each of the G530's serial ports can support a 100 addresses in any combination of controller/terminal. The individual addresses are mapped to TCP/IP sessions (sockets) for processing by the TCP device. The G530 support host and terminal emulation for a wide variety of Legacy protocols and Client or Server emulation for TCP or UDP.

The Gateways can be ordered with Frame Relay connections using an internal or external DSU. With the frame port, the Gateways provide a complete router replacement with full protocol conversion.

Return to the Gateway 500, 530 and 550 Flyer