SEARCH 

Wireless Series Ordering Instructions

Overview

The Wireless Series routers have several options that must be properly specified at time of order. The order code follows the format:

 

Model Number - Carrier - Power Supply

The cables for the Gateways can be ordered from JBM Electronics or fabricated using the information in the unit's Cable Manual.

 

Step 1 – Model Selection

The Wireless Connector Series are small footprint units designed to connect several devices to a Wireless Network.
Unit
Serial
Ports
Modem
Ports
Ethernet
Port
Console
Port
Wireless
Port
Gateway C120
-
-
Two
One
One - CardBus

 

Unit
Serial
Ports
Modem
Ports
Ethernet
Port
Console
Port
Wireless
Port
Gateway C130
Two - Async
-
Two
One
One - CardBus
Gateway C131
Two - Async
One-Dial Tone
Two
One
One - CardBus
Gateway C132

Two - Async
One - Sync
-
Two
One
One - CardBus
Gateway C134
Two - Async
One 56 KB Modem
Two
One
One - CardBus

 

Unit
Serial
Ports
Modem
Ports
Ethernet
Port
Console
Port
Wireless
Port
Gateway C200
One
-
One
One
One - CDMA
Gateway C201
One
One-Dial Tone
One
One
One - CDMA
Gateway C202
One - Async
One - Sync
-
One
One
One - CDMA
Gateway C204
One - Async
One 56 KB Modem
One
One
One - CDMA

 

Unit
Serial
Ports
Modem
Ports
Ethernet
Port
Console
Port
Wireless
Port
Gateway C250
One
-
One
One
One - GSM
Gateway C251
-
One-Dial Tone
One
One
One - GSM
Gateway C252
One - Sync
-
One
One
One - GSM
Gateway C254
One - Async
One 56 KB Modem
One
One
One - GSM

Step 2 – Carrier Selection

The cell modem is carrier specific. The available carriers are:
Feature Code
 Carrier
-S
 Sprint
-V
 Verizon
-G
 GSM/GPRS Domestic (1800 MHz). C25x Series only.
-I
GSM/GPRS International (1800 MHz). C25x Series only.
Note: The C120 and C130 use carrier-supplied Air Cards, which are installed in the CardBus slot.
 

It is your responsibility to order the carrier account for the cell modem module selected in this step. Once the Gateway is received, the unit must be registered with the phone number provided by the carrier.

For example, the order code for a C201 connected to Sprint will be C201-S.

 

Step 3 – Power Supply

The Gateways use an external power supply, which connects to the unit with a small barrel plug. If an International Power supply is required (220 Volts), use the Feature Code – H.

For example, to order a C201 connected to a GPRS network with a 220 V power supply, use order code – C201-I-H.

The International power supply terminates in a PC-style connector (IEC 60320) and requires a customer-supplied power cord.

Step 4 – Cables

The C120, C130, C200 and C250 Series have the following standard connectors:

Type
Connector
Cable Description
Order Code
Ethernet
RJ-45
-
-

Async Port (protocol)
(all units except for the C120)
DE-9 DTE
(Male)
9-pin Female to 25-pin Male, 1 foot
C/Async
9-pin Female to 25-pin Male, 1 foot
(DCE adapter for DTE devices)
C/Async-DTE
Dial-Only Port
RJ-11
Straight-wire telco cable
-
Console Port -
DE-9 DTE
(Female)
9-pin Male to 9-pin Female
C/Console
Antenna
SMA
5 meter stick-on
-

Other antennas are available for the Gateways. We recommend antenna.com or airdesk.net for other choices. If you have any questions on antennas, please contact us.

The individual C130, C200 and C250 Series models use the following connectors, which terminate on the rear panel:

Model
Connector
Cable Description
Order Code
C131/C201/C251
RJ-11
Straight-wire telco cable
-
C132/C202/C252
DB-25 DCE
(Female)
25-pin Male to 25-pin Female (DCE)
C/DB25
25-pin Male to 25-pin Female, (DTE adapter for DCE devices)
C/DB25-DCE
C134/C204/C254
RJ-11
Straight-wire telco cable
-

The wire list for all of the cables is available in the C120, C130 or C200 and C250 Cable Manual.

 

Conclusion

Correct specification of the options is necessary to prevent installation problems. Please contact JBM sales if you need assistance or pricing on any of the items.

To return to the Wireless Series flyer, please click here.

We continually enhance the Gateways so specifications are subject to change without notice.