Broadband Connector Ordering Instructions
Overview
The
Gateway IP Series has several
options that must be properly specified at time of order to work
in your installation. The Gateways can be ordered with a combination
of model number and feature codes. The order will have the following
format:
| |
Model
Number - Power Supply
|
The cables for the Gateways
can be ordered from JBM Electronics or fabricated using the information
in the unit's Cable Manual.
Step 1 – Model Selection
The IP Connector Series is available with a variety
of port configurations. The available models are:
| Unit |
Serial
Ports |
Modem
Ports |
Ethernet
Port |
Console
Port |
| Gateway
C20 |
One |
- |
One |
- |
| Gateway
C21 |
- |
Dial-Tone |
One |
- |
| Unit |
Serial
Ports |
Modem
Ports |
Ethernet
Port |
Console
Port |
| Gateway
C100 |
One |
- |
One |
One |
| Gateway
C101 |
One |
Dial-Tone |
One |
One |
| Gateway
C102 |
One
- Async
One - Sync |
- |
One |
One |
| Gateway
C104 |
One |
56
KB Modem |
One |
One |
| Unit |
Serial
Ports |
Modem
Ports |
Ethernet
Port |
Console
Port |
| Gateway
C110 |
One |
- |
Two |
One |
| Gateway
C111 |
One |
Dial-Tone |
Two |
One |
| Gateway
C112 |
One
- Async
One - Sync |
- |
Two |
One |
| Gateway
C114 |
One |
56
KB Modem |
Two |
One |
The IP Consolidator
Series are rack-mounted units designed to connect many devices at
a single location to an Ethernet Network. The units can be ordered
with an optional 56 KB async modem for fallback.
| Unit |
Serial
Ports |
Modem
Ports |
Ethernet
Port |
Console
Port |
| Gateway
C3100 |
One |
One
Dial-Tone |
Two |
One |
| Gateway
C3200 |
Two |
Two
Dial-Tone |
Two |
One |
| Gateway
C3400 |
Four |
- |
Two |
One |
| Gateway
C3800 |
- |
Four
Dial-Tone |
Two |
One |
| Gateway
C3280 |
Two |
Six
Dial-Tone |
Two |
One |
| Gateway
C3480 |
Four |
Four
Dial-Tone |
Two |
One |
| Gateway
C3880 |
- |
Eight
Dial-Tone |
Two |
One |
The C3000 Series
models listed above are the common configurations. Other port configurations
are available as a special order. For a list of the available models
and their part numbers, please click here.
Typical uses for the Gateways are:
| Model |
Application
|
| C100
/ 110 |
Connects
async RS-232C devices to the Ethernet network. |
| C101
/ 111 |
Connects
async and dial-only async devices to the Ethernet network. |
| C102
/ 112 |
Connects
async and dial-only devices to the Ethernet network. |
| C104
/ 114 |
Adds
a high-speed async modem to the C100 for fallback. |
| |
|
| C3xxx |
Connects
several devices at a single location to an Ethernet network. |
| C3xx5 |
Adds
a high-speed async modem to the C3000 for fallback. |
Step 2 – Power Supply
The
C100 and C3000 Series use an external power supply, which connects
to the unit with a small barrel plug. If an International Power
supply is required (220 Volts), use the Feature Code – H.
For example,
to order a C101 with a 220 V power supply, use order code –
C101-H.
The International
power supply terminates in a PC-style connector (IEC 60320) and
requires a customer-supplied power cord.
Step
3 – Cables
The C100, C110
and C3000 Series have the following standard connectors:
| Type |
Connector |
Cable
Description |
Order
Code |
| Ethernet
|
RJ-45 |
- |
- |
Async
Port (protocol) |
DE-9
DTE
(Male) |
9-pin
Female to 25-pin Male, 1 foot |
C/Async |
|
9-pin
Female to 25-pin Male, 1 foot
(DCE adapter for DTE devices) |
C/Async-DTE |
Dial-Only
Port |
RJ-11 |
Straight-wire
telco cable |
- |
|
Console
Port - C100 Series |
DE-9
DTE
(Female) |
9-pin
Male to 9-pin Female |
C/Console |
|
Console
Port - C3000 Series |
DE-9
DTE
(Female) |
9-pin
Male to 9-pin Female |
C/Console |
The individual
C100 and C3000 Series models use the following connectors, which
terminate on the rear panel:
| Model |
Connector |
Cable
Description |
Order
Code |
| C100 /
C110 |
None |
- |
- |
C101
/ C111
|
RJ-11
| Straight-wire
telco cable |
- |
| C102
/ C112 |
DB-25
(female) |
25-pin
Male to 25-pin Female (DCE) |
C/DB25 |
| 25-pin
Male to 25-pin Female, (DTE adapter for DCE devices) |
C/DB25-DCE |
| C104
/ C114 |
RJ-11 |
Straight-wire
telco cable |
- |
C3xxx
Dial-tone |
RJ-11 |
Straight-wire
telco cable |
- |
C3xxx
RS-232C |
DE-9
DTE (Male) |
9-pin Female to 25-pin Male, 1 foot |
C/Async |
| DE-9 DTE
(Male) |
9-pin
Female to 25-pin Male, 1 foot (DCE adapter for DTE devices) |
C/Async-DTE |
C3xx5
Modem |
RJ-11 |
Straight-wire
telco cable |
- |
The wire list
for all of the cables is available in the C20/C21,
C100/C110
or C3000 Cable
Manual.
Conclusion
Correct specification of the options is necessary to prevent installation
problems. Please contact JBM sales
if you need assistance or pricing on any of the items.
To return to the IP Series flyer, please click here.
We continually
enhance the Gateways so specifications are subject to change without
notice. | 
